Change charging station settings

Services

Listed below are the services we can provide remotely.*All prices mentioned excluding taxes

E-Flux can change the following configuration settings remotely:

  • Change Ampere
  • Install Plug & Charge identifier
  • Illumination charging station

€12,50 / per change*

E-Flux offers the ability to personalize your logo and set it up on your display.

€20 / charging station*

Alfen’s charging stations can be connected to a smart meter. This means that the charging stations take the usage into consideration by means of “load balancing”. When you use too much electricity, the charging station can cut back on the usage. When your usage slows down, your EV can go back to charging faster. In case there isn’t a (suitable) smart meter on site, active load balancing can be set up through an external energy meter.

€30 / charging station*

Licences

The licences below can be ordered through your supplier. Alfen chargers can be upgraded with extra features during or after installation. This is only necessary when the chargers are ordered without pre-configuration.

Important note: you need to ensure all the charging stations have the correct licences.

Logo on display

You can personalise your logo and set it up on your display.

Power increase to 32A double socket

With this licence, we can increase the capacity from 20A to 32A double sockets.

Alfen active load balancing

When you use too much electricity, the charging station can cut back on the usage. When your usage slows down, your EV can go back to charging faster. E-Flux can set this up remotely.

RFID-reader

In case you want to activate the RFID-reader on your charging station to accept charge cards, you can request this licence. E-Flux will then activate this for your charging station.