Skip to main content

Change charging station settings

View below the services we offer as support.

Request a service

Fill in the form below, and request the service you want. Important note, you have the responsibility to make sure all the charging stations have the correct licenses. You can order these through your supplier.

Services

Listed below are the services we can provide remotely.

Upload your logo

E-Flux offers the ability to personalize your logo and set it up on your display.

 €20 / charging station*

Changes in configuration

E-Flux can change the following configuration settings remotely:

  • Change Ampere
  • Install Plug & Charge identifier
  • Illumination charging station
 €12,50 / per change*

Install Dynamic Load Balancing through smart meter

Alfen’s charging stations can be connected to a smart meter. This means that the charging stations take the usage into consideration by means of “load balancing”. When you use too much electricity, the charging station can cut back on the usage. When your usage slows down, your EV can go back to charging faster. In case there isn’t a (suitable) smart meter on site, active load balancing can be set up through an external energy meter.

 €30 / charging station*

*All prices mentioned excluding taxes

Licenses

The below mentioned licenses can be ordered through your supplier. Alfen chargers can be upgraded with extra features during – or after the installation. This is only necessary when the chargers are ordered without pre-configuration. Important note, you have the responsibility to make sure all the charging stations have the correct licenses.

Logo on display

E-Flux offers the ability to personalize your logo and set it up on your display.

Power increase naar 32A double socket

With this license, we can increase the capacity from 20A to 32A double sockets.

Alfen active load balancing

When you use too much electricity, the charging station can cut back on the usage. When your usage slows down, your EV can go back to charging faster. E-Flux can set this up remotely.

RFID-reader

In case you want to activate the RFID-reader on your charging station for accepting charge-cards, you can request this license. E-Flux will then activate this for your charging station.